- The acceptance process of prestressed concrete steel wire and prestressed concrete steel strand has some similarities, but the inspection standards for the two are different. Then the following is the specific inspection method of prestressed concrete steel wire and prestressed concrete steel strand.Prestressed concrete steel wire acceptance1. Visual inspectionThe appearance quality of the steel wires for prestressed concrete should be checked on a plate by plate. There should be no oil stains, scales, cracks, or mechanical damage on the surface of the steel wire, but floating rust and tempering colors are allowed on the surface. The zinc layer of galvanized steel wire should be smooth and uniform without cracks. For wire diameter inspection, select 10% discs, but not less than 6 discs.2. Mechanical performance testThe mechanical properties of prestressed concrete steel wire should be sampled and tested. Each acceptance batch should be composed of prestressed concrete steel wires of the same brand, same specification, and the same production process system, and the weight should not be greater than 60t. After the steel wire has passed the visual inspection, 10% reels (not less than 6 reels) of steel wires are randomly selected from the same batch. Cut two specimens at any position on each plate, one for the tensile test (tensile strength and elongation), and one for the repeated bending test. If a certain test result does not meet the requirements of the GB 5223-2002 standard, the steel wire coil is a non-conforming product; and a double number of test pieces are taken from the same batch of untested steel wire coils for re-inspection, such as If there is still one test result that is unqualified, the batch of steel wires shall be judged as unqualified products, or the qualified products shall be inspected one by one.If the design documents have specified requirements for fatigue performance, employability, etc., sampling tests should be carried out again.Prestressed concrete steel strand acceptance1. Visual inspectionThe appearance quality of the steel strand wire for prestressed concrete should be inspected one by one. The lay length of the steel strand should be uniform, not loose after being cut, and its surface must not have oil stains, rust spots or mechanical damage, but floating rust and tempering are allowed. The coating surface of galvanized or epoxy-coated steel stranded wire, unbonded steel stranded wire, etc. should be uniform, smooth, free of cracks, and no obvious folding. The grease weight and sheath thickness of the unbonded prestressing tendons shall be 60t as a batch, and 3 test pieces shall be taken for inspection. The test results should meet the quality requirements of unbonded prestressed tendons.2. Mechanical performance testThe mechanical properties of prestressed concrete steel strands should be sampled for inspection. Each acceptance batch should be composed of steel strands of the same brand, same specification, and the same production process system, and the weight should not be greater than 60t. After the steel strands have passed the visual inspection, 3 reels of steel strands shall be randomly selected from the same batch. A test piece is intercepted from the position and subjected to a tensile test. If a certain test result does not meet the requirements of the GB/T 5224-2003 standard, the unqualified disk shall be discarded. Take twice the number of test pieces from the prestressed concrete steel strands that have never been tested for re-inspection. If there is still one unqualified item, the batch of prestressed concrete steel strands shall be judged as unqualified products.For the fatigue performance and deflection tensile performance specified in the design documents, sampling tests should be carried out again.The acceptance of prestressed concrete steel wires and prestressed concrete steel strands should be carried out in accordance with relevant national standards, and the inspection process also needs to be treated strictly. If you still have doubts about the acceptance of prestressed concrete steel wire and prestressed concrete steel strand after reading the above content, you can contact us and we will provide you with professional consultation and related solutions.As a professional manufacturer of high-quality prestressed concrete steel wires and steel strands, Chunpeng has always provided customers with high-quality and high-performance prestressed concrete products with its rich manufacturing experience and can provide all customers with professional solutions. So if you want to buy our high-quality prestressed concrete products, please contact us immediately!pdf document download
Learn more from our FAQ
ASTM A416 Chunpeng 7 wire prestressed concrete strand
ASTM A416 Chunpeng 7 wire prestressed concrete strand2021-03-05
PE coated PC strand
PE coated PC strand2021-03-05
Can I visit you?
Sure, If you would like to visit our factory, please contact us to make an appointment.More details
How can I know how my order is being done?
We will inspect and test all items in order to avoid damage and missing parts before shipping. The detailed inspection pictures of the order will be sent to you for your confirmation before delivery.More details
Can you give warranty of your products?
3.Yes, we extend a 100% satisfaction guarantee on all items. Please feel free to feedback immediately if you are not pleased with our quality or service. For the overseas orders, we provided emails with details including pictures or short video to you to confirm the quality before the shipment.More details
4.How long of your delivery time?
Generally need 5-10 days if it is in stock. Or need 15-20 days if it is out of stock.More details
CHUNPENG is a professional manufacturer of pc strand, pc steel wire, unbonded pc strand, retard bonded pc strand, anchorage and post tension ducts in Tianjin, China. Our company was established in 1994 and we specialize in manufacturing the following products:...more>